
Clark Forklift Camera and Pedestrian Detection Fitment Guide
Find your Clark series, match the power, and order the right RioV360 kit.
This guide lists Clark forklifts by truck type and series with the RioV360 kit, power connection, accessories and camera layout for each. Gas, LP and diesel trucks connect directly. Electric trucks use their low-voltage accessory circuit.
How to Use This Clark Forklift Fitment Guide
- Find your Clark series in the tables below.
- Match the power column to your truck. RioV360 runs on 8 to 32 V DC, so IC trucks connect directly to the switched ignition circuit.
- Confirm the model and voltage on the truck data plate. Model ranges change by year and region.
- Check attachments. Side shifters, clamps and long forks can change where cameras need to go.
- Order the complete kit, plus any accessories listed for your truck type.
Take it to the shop floor. The printable fitment guide has the truck type and series tables, power connections, camera and beacon layout, accessories and PILOT unit details in a PDF.
Clark Forklift Pedestrian Detection by Truck Type
| Truck type | Capacity | Power | RioV360 power connection | RioV360 Accessories | Notes |
|---|---|---|---|---|---|
| IC Pneumatic | 4,000 to 18,000 lb | 12 V | Direct: 12 V key-switched circuit | RV360-EXT, RV360-512 | Outdoor yards and docks. Rear camera on the counterweight or overhead guard. |
| IC Cushion | 3,000 to 15,500 lb | 12 V | Direct: 12 V key-switched circuit | RV360-EXT, RV360-512, RV360-MAG | Indoor and dock work. RV360-MAG speeds installs on steel guards. |
| Electric Counterbalance | 3,000 to 10,000 lb | 36, 48 or 80 V battery | Truck accessory circuit (12/24 V, key-switched). Fallback: RV360-DCC | RV360-EXT, RV360-512, RV360-DCC if needed | Never connect RioV360 to the traction battery. |
| Warehouse Trucks | Up to about 4,500 lb | 24, 36 or 48 V battery | Truck accessory circuit (12/24 V, key-switched). Fallback: RV360-DCC | RV360-EXT, RV360-512, RV360-DCC if needed | Reach trucks and order pickers: mount on the overhead guard, clear of the mast. |
Clark Forklift Models by Truck Type
| Truck type | Series and models | Capacity |
|---|---|---|
| IC Pneumatic | GTS20-33, S20-S60, C20-C35 (C25L, C30D), C40-C55, C60, C70, C75, C80 | 4,000 to 18,000 lb |
| IC Cushion | C15C-C20sC, S20C-S32C, CGC25-CGC70 | 3,000 to 15,500 lb |
| Electric Counterbalance | GEX, SE, SEC and ECX series, TWLi20 3-wheel | 3,000 to 10,000 lb |
| Warehouse | Stand-up, pallet and stacker trucks | Up to about 4,500 lb |
Older Clark Forklifts
| Truck type | Older series | How to match |
|---|---|---|
| IC | C500 series, CGP and earlier CGC | Match by fuel and capacity |
| Electric | Earlier ECX, TM and EPX electrics | Use the accessory circuit, or the RV360-DCC |
Older trucks fit by truck type and power. IC trucks connect directly to 12 V. Electric trucks use the key-switched accessory circuit or the RV360-DCC. Not listed? Send the data plate photo and we will confirm the kit within one business day.
Series, capacities and model lists are approximate and vary by year and region. Clark is a trademark of its owner. RioDatos is not affiliated with or endorsed by Clark. Model names are used only to identify compatible machines.
Clark Forklift Pedestrian Detection Power: IC and Electric
- Gas, LP and diesel: 12 V system. Connect to a fused, key-switched 12 V circuit and the constant 12 V line, as the user manual shows.
- Electric: 24, 36, 48 or 80 V traction battery. Never connect RioV360 to the traction battery.
- Accessory circuit: electric trucks run lights, horn and dash on a key-switched 12 or 24 V circuit. A qualified installer can tap it, with no converter needed.
- No low-voltage circuit: add the RV360-DCC isolated DC-DC converter. Electric forklift batteries are isolated from the frame, so the converter must be isolated too.
RioV360 User Manual: installation, settings and troubleshooting. Download the RioV360 User Manual (PDF, v4.4).

Camera / Beacon Layout for Clark Forklifts
- Rear: on the counterweight or the rear overhead guard crossbar, aimed at the reverse path.
- Sides: on the overhead guard posts, aimed along the turning arc.
- Front: on the front overhead guard crossbar, looking past the load and mast.
- Monitor: on the overhead guard post or dash with the RV360-EXT kit.
- Beacon: high on the rear guard, where people on foot can see and hear it.
A common alternative layout is two cameras forward, one rear and a side curtain zone on the passenger side.
No tags for workers to wear: the AI cameras detect any person in the zone.
RioV360 Accessories in This Guide
- RV360-EXT: Monitor Extension and Mounting Kit: rail clamp, round base, cab-frame bracket or T-attachment.
- RV360-512: Upgraded Storage: 512GB card for about 60 hours of continuous video.
- RV360-MAG: Magnetic Camera Mounts: no-drill mounting on steel guards and counterweights (US shipments).
- RV360-CBX: Extension Cables: two 3 m and two 5 m camera cables plus a 5 m monitor cable for long trucks.
- RV360-DCC: Isolated DC-DC Converter: for electric trucks with no low-voltage circuit. Priced on quote.
PILOT Unit Program
Prove It on Your Clark Before You Commit
Put RioV360 on your highest-risk Clark forklift and let your operators, supervisors and EHS team see it work in your own operation. No long trial agreements and no software to set up. Install it, run it, and decide.
- Pick the truckChoose the forklift with the most foot traffic or the worst blind spots.
- OrderSend the model and serial number. Pay by credit card.
- Ships fastIn-stock units ship from Arizona in 2 business days.
- InstallFollow the user manual and the layout in this guide.
- Roll outUse the same kit and layout across the rest of the fleet.
Included with the PILOT unit: 4 AI cameras, 7 inch monitor, 120 dB voice beacon, 256GB card, wiring harness, mounting hardware, user manual and 18-month warranty. Phone, email or Teams support for your installer.
Recommended PILOT Unit Accessories
Upgraded Storage
512GB high endurance card for about 60 hours of continuous video.
Monitor Extension and Mounting Kit
Rail clamp, round base, cab-frame bracket or T-attachment.
Magnetic Camera Mounting Kit
No-drill camera mounts to trial positions on steel guards.
Bench Test AC Power Adapter
Run the system from a wall outlet and learn it on a table before install.
Frequently Asked Questions
Does RioV360 fit Clark forklifts?
Yes. Clark IC trucks run 12 V and connect directly. Clark electric trucks use the key-switched accessory circuit.
Which Clark forklift models does RioV360 fit?
All current Clark IC and electric counterbalance series. IC pneumatic: GTS20-33, S20-S60, C20-C35 (C25L. IC cushion: C15C-C20sC, S20C-S32C, CGC25-CGC70. Electric counterbalance: GEX, SE, SEC and ECX series. Older trucks fit by truck type and power.
Does RioV360 work on electric Clark forklifts?
Yes. Connect to the key-switched 12 or 24 V accessory circuit. If the truck has none, add the RV360-DCC isolated converter. Never connect to the traction battery.
Where do the cameras go on a forklift?
On the overhead guard and counterweight: rear, both sides and front, looking past the load and mast. The monitor goes on the guard post or dash.
Do workers need to wear tags?
No. RioV360 uses AI cameras to detect any person in the zone, with nothing to wear or charge.
More for forklift fleets: forklift blind spot detection, heavy-duty forklifts and all forklift brand guides.
Request a Clark Forklift Camera System Quote
Send your Clark models and quantities. Within one business day, we will email pricing, the recommended kit and accessories.
Prefer to talk? Call John directly at +1 (520) 501-0602 or email info@riodatos.com.
