
Wheel Loader Camera System Fitment Guide
Find your loader, match the size class, and order the right RioV360 kit.
This guide groups wheel loaders by size class, with the RioV360 kit, power connection, accessories and camera layout for each. Find your Cat, Volvo, Komatsu, Deere, Case, JCB, Liebherr or Hyundai model and order with confidence.
How to Use This Wheel Loader Camera System Guide
- Find your brand and model in the table below. The model number sets the size class.
- Match the size class to its power connection and accessories. RioV360 runs on 8 to 32 V DC, so 12 V and 24 V loaders connect directly.
- Confirm the model and voltage on the machine data plate. Model ranges change by year and region.
- Plan the camera positions. On articulated loaders, cameras mounted on the cab and rear frame keep cables off the center hinge.
- Order the complete kit, plus any accessories listed for your size class.
Take it to the shop floor. The printable Wheel Loader Fitment Guide has the size class and brand tables, power connections, camera and beacon layout, accessories and PILOT unit details in a PDF.
Wheel Loader Camera System Fitment by Size Class
| Size class | Operating weight | Power | RioV360 power connection | RioV360 Accessories | Notes |
|---|---|---|---|---|---|
| Compact | Under about 20,000 lb | 12 or 24 V (check the machine) | Direct: key-switched circuit and constant power line | RV360-EXT, RV360-512, RV360-MAG | Low cab and short runs. Standard cables reach all four cameras. |
| Small / Utility | About 20,000 to 35,000 lb | 24 V | Direct: 24 V key-switched circuit | RV360-EXT, RV360-512, RV360-MAG | Yards, snow, ag and utility work. Rear camera on the counterweight or rear grille guard. |
| Medium | About 35,000 to 60,000 lb | 24 V | Direct: 24 V key-switched circuit | RV360-EXT, RV360-CBX, RV360-512 | Quarries, aggregates and waste. Add RV360-CBX for the longer rear camera run. |
| Large / Production | About 60,000 to 130,000 lb | 24 V | Direct: 24 V key-switched circuit | RV360-EXT, RV360-CBX, RV360-512 | Truck loading at the face. Mount cameras high on the cab and counterweight. |
| Mining | Over about 130,000 lb | 24 V | Direct: 24 V key-switched circuit | RV360-EXT, RV360-CBX, RV360-512 | Very long machines: confirm cable lengths with us before install. Detection covers 0 to 5 m from each camera. |
| Battery-Electric Compact | Under about 12,000 lb | High-voltage battery | Key-switched 12/24 V accessory circuit, or RV360-DCC | RV360-EXT, RV360-512, RV360-DCC if needed | Never connect RioV360 to the traction battery. |
Wheel Loader Models by Brand and Size Class
| Brand | Compact | Small / Utility | Medium | Large / Production | Mining |
|---|---|---|---|---|---|
| Cat | 903, 906, 907, 908, 910, 914 | 920, 926, 930 | 938, 950, 950 GC, 962, 966, 966 GC, 972 | 980, 982, 986, 988, 988 GC | 990, 992, 994, 995 |
| Volvo | L20, L25, L30, L35, L45H, L50H | L60H, L70H, L90H | L110H, L120H, L150H, L180H | L220H, L260H, L350H | Not listed |
| Komatsu | WA70M-8, WA100M-8 | WA200-8, WA270-8 | WA320-8, WA380-8, WA475-10, WA480-8, WA485-11 | WA500-8, WA600-8 | WA700-8, WA800-8, WA900-8, WA1200-6 |
| John Deere | 184, 204, 244, 304, 324, 326, 344 | 444, 524, 544, 624 | 644, 724, 744 | 824, 844, 904, 944 | Not listed |
| Case | 321G, 421G | 521G, 621G, 651G | 721G, 821G, 921G, 1021G | 1121G | Not listed |
| JCB | 403, 407, 409 | 411, 413S, 417, 419S, 427 | 437, 457 | Not listed | Not listed |
| Liebherr | L 504, L 506, L 507, L 509 Tele, L 514, L 518 | L 526, L 538, L 546 | L 550, L 556, L 566 | L 580, L 586 | Not listed |
| Hyundai | Not listed | HL935, HL940 | HL955, HL960, HL965, HL970 | HL975, HL980 | Not listed |
Older Wheel Loaders
| Brand | Older series | How to match |
|---|---|---|
| Cat | H, K and M series | 950H, 966K and 980M fit like the 950, 966 and 980 |
| Volvo | E, F and G series | L90F and L120G fit like the L90H and L120H |
| Komatsu | Dash-5, Dash-6 and Dash-7 | WA380-6 fits like the WA380-8 |
| John Deere | J, K and L series | 644K and 744L fit like the 644 and 744 |
| Case | E and F series | 621F and 821F fit like the 621G and 821G |
| Hyundai | 9 and 9A series | HL760-9A fits in the Medium class |
The model number sets the size class. The series letter or dash number is the generation, so an older loader fits like the current model with the same number. Not listed? Send the make and model and we will confirm the kit within one business day.
Size classes, weights and model lists are approximate and vary by year and region. Brand and model names are trademarks of their owners. RioDatos is not affiliated with or endorsed by any manufacturer listed. Model names are used only to identify compatible machines.
Wheel Loader Camera System Power: 12 V, 24 V and Electric
- Diesel loaders: almost all run 24 V. Connect to a fused, key-switched 24 V circuit and the constant 24 V line, as the user manual shows. No converter needed.
- Compact loaders: some run 12 V, some 24 V. Both connect directly. Check the battery or data plate.
- Battery-electric loaders: never connect RioV360 to the traction battery. Tap the key-switched 12 or 24 V accessory circuit that runs the lights and dash.
- No low-voltage circuit: add the RV360-DCC isolated DC-DC converter. Battery packs are isolated from the frame, so the converter must be isolated too.
RioV360 User Manual: installation, settings and troubleshooting. Download the RioV360 User Manual (PDF, v4.4).

Camera / Beacon Layout for Wheel Loaders
- Rear: on the counterweight or rear grille guard, aimed at the reverse path. Most loader incidents happen in reverse.
- Sides: on the rear frame or cab corners, aimed along the turning arc.
- Front: on the front edge of the cab roof, looking past the bucket in carry position. Mounting on the cab keeps the cable off the articulation joint.
- Monitor: on the cab post or dash with the RV360-EXT kit.
- Beacon: high on the rear of the cab roof, where ground crews can see and hear it.
If a camera goes on the front frame or loader tower, route the cable through the center hinge with a service loop and split loom so it flexes with steering.
No tags for workers to wear: the AI cameras detect any person in the zone.
RioV360 Accessories in This Guide
- RV360-EXT: Monitor Extension and Mounting Kit: rail clamp, round base, cab-frame bracket or T-attachment.
- RV360-CBX: Extension Cables: two 3 m and two 5 m camera cables plus a 5 m monitor cable for long machines.
- RV360-512: Upgraded Storage: 512GB card for about 60 hours of continuous video.
- RV360-MAG: Magnetic Camera Mounts: no-drill mounting on steel surfaces, ideal for trial positions (US shipments).
- RV360-DCC: Isolated DC-DC Converter: for battery-electric loaders with no low-voltage circuit. Priced on quote.
PILOT Unit Program
Prove It on Your Loader Before You Commit
Put RioV360 on your highest-risk wheel loader and let your operators, supervisors and EHS team see it work in your own operation. No long trial agreements and no software to set up. Install it, run it, and decide. See the wheel loader pilot program.
- Pick the loaderChoose the machine with the most foot traffic or the worst rear blind spot.
- OrderSend the make, model and serial number. Pay by credit card.
- Ships fastIn-stock units ship from Arizona in 2 business days.
- InstallMost teams finish in under 2 hours with the user manual.
- Roll outUse the same kit and layout across the rest of the fleet.
Included with the PILOT unit: 4 AI cameras, 7 inch monitor, 120 dB voice beacon, 256GB card, wiring harness, mounting hardware, user manual and 18-month warranty. Phone, email or Teams support for your installer.
Recommended PILOT Unit Accessories
Upgraded Storage
512GB high endurance card for about 60 hours of continuous video.
Monitor Extension and Mounting Kit
Rail clamp, round base, cab-frame bracket or T-attachment.
Extension Cables
Longer camera and monitor runs for medium and large loaders.
Bench Test AC Power Adapter
Run the system from a wall outlet and learn it on a table before install.
Frequently Asked Questions
Does RioV360 fit Cat wheel loaders?
Yes. From the compact 906 to the 994, Cat loaders run on 12 or 24 V, which RioV360 uses directly. Find the model in the brand table to get the size class and accessories.
Does RioV360 work on 24 V wheel loaders?
Yes. RioV360 runs on 8 to 32 V DC, so 24 V loaders connect directly to the key-switched circuit with no converter.
My loader is an older model. Will it fit?
Yes. Match it by model number. The series letter or dash number is the generation, so a Cat 950H fits like a 950 and a Komatsu WA380-6 fits like a WA380-8.
Where should the front camera go on an articulated loader?
On the front edge of the cab roof. It looks past the bucket in carry position and keeps the cable off the articulation joint.
Do workers need to wear tags?
No. RioV360 uses AI cameras to detect any person in the zone, with nothing to wear or charge.
More on loaders: wheel loader pedestrian detection.
Request a Wheel Loader Camera System Quote
Send your loader makes, models and quantities. Within one business day, we will email pricing, the recommended kit and accessories.
Prefer to talk? Call John directly at +1 (520) 501-0602 or email info@riodatos.com.
