RioV360 — 360° AI Pedestrian Detection System
RioV360 is a complete 360° AI pedestrian detection system designed for forklifts, wheel loaders, excavators, and other heavy equipment. It delivers full perimeter coverage with four rugged cameras, real-time alerts, and 10+ work days of on-device video recording — no cloud, no subscriptions, no IT headaches.
What's in the RioV360 System
➜ 4 AI Cameras 1080p IP69K cameras, 130° field of view each, full 360° perimeter coverage. Detects workers and vehicles simultaneously. Rated for dust, mud, wash-down, and temperature extremes.
➜ 7" In-Cab Monitor Color LCD with sunshade and alarm speaker. Real-time visual and audible alert the moment a worker or vehicle enters the detection zone. Adjustable sensitivity. No manual activation.
➜ External Flashing Beacon 120dB voice alert, audible alarm, and flashing light — integrated into the RioV360, triggers simultaneously with the in-cab alert. Warns workers on foot the moment they enter the detection zone.
➜ 512GB SD Card About 10 workdays of continuous 1080p recording across all four cameras. Date and time stamped, organized by day. Pull the card on site and review on any laptop. No login. No upload. No cloud.
➜ Complete Installation Kit Every bracket, cable, fastener, TEK screw, split loom, relay, and connector in the box. Nothing to source separately. Your team installs it and the machine is protected the same week.
Green. Yellow. Red. No Training Required.
When an alert system isn't intuitive, operators second-guess it. Response slows. Alerts get ignored.
RioV360 uses green-yellow-red — the same escalation language already on every job site. Operators understand it immediately. Every red alert means stop. No ambiguity. No desensitization.
Configured Zone per your Company Policy
🟢 Green zone — awareness perimeter — the machine is operating normally, no pedestrians in proximity
🟡 Yellow zone — caution perimeter — someone is approaching, reduce speed and increase awareness
🔴 Red zone — stop zone — a pedestrian or vehicle is in the exclusion zone, stop immediately
Zone boundaries are adjustable per camera. Sensitivity can be set to High, Middle, or Low. The system can be configured to alert for pedestrians only, vehicles only, or both.
The Blind Zone Isn't the Operator's Fault
Every machine on your site has a structural dead zone built into its design. Not operator error. A design gap. RioV360 closes it.
Every Accident. Every Near-Miss. Every Claim. On Video.
Safety teams spend hours reconstructing what happened after an incident — interviewing witnesses, pulling reports, filing claims — often with no footage and conflicting accounts.
➡️ Insurance claims — footage from the exact moment of impact, from four angles
➡️ Material delivery damage — know whether it arrived that way or happened on site
➡️ Near-miss reviews — turn close calls into safety training instead of near-tragedies
➡️ Operator accountability — clear record of what was visible and when alerts fired
➡️ Incident investigation — stop relying on memory and start reviewing actual footage
One incident. One claim.
RioV360 pays for itself.
The Worker Is
Warned Too.
Every detection system focuses on alerting the operator. RioV360 does that. But the External Flashing Beacon does something the monitor cannot — it alerts the worker on foot the moment they enter the detection zone.
🔴 120dB voice alert + audible alarm + flashing red light — all three activate simultaneously on detection
🔌 Plug-and-play — 4-pin aviation connector, cables directly to the monitor harness. No configuration required.
🏗️ High-impact plastic housing — standard kit. Steel housing available in the Heavy Duty Installation Kit.
"No one wants to set off the system. The 120dB alarm is not something a worker forgets. When the beacon is quiet, it is doing exactly what it was designed to do."
2 Weeks of On-Device Video - Your Fleet's 'Black Box'
RioV360 records continuously to the included 512GB industrial SD card — about 2 weeks of machine-on recording stored locally on the machine. No cloud. No subscription. No IT involvement required.
📹 Incident documentation — date-stamped footage from four angles, ready the moment it's needed
🎓 Training video — real proximity events, real machine behavior, real operating conditions
🔒 Theft and damage confirmation — disputed claims resolved with on-machine footage
🖥️ Easy access — view from the in-cab monitor or pull the SD card and open on any laptop. No special software required.
🗄️ Automatic loop recording — 512GB holds about 2 weeks of machine-on recording. When the card fills, the system loop records.
When RioV360 is Right
✅ Your operation has active pedestrian exposure on all sides of the machine — forklifts, excavators, wheel loaders, heavy-duty lifts, dump trucks, telehandlers, scrapers, and skid steers all have blind zones where workers on foot share space with a moving machine on every cycle. RioV360 covers all four sides simultaneously with no gaps.
✅ You need video documentation you can actually use — incident investigations, insurance claims, near-miss reviews, and operator training all require footage. RioV360 records continuously to a 512GB SD card — about 10 workdays of machine-on recording, date and time stamped, accessible from the cab or any laptop without login or upload.
✅ Your site has no WiFi, no cloud, and no IT infrastructure — remote quarries, active construction corridors, cut-off zones, and industrial yards operate without reliable connectivity. RioV360 processes and records entirely on-device. No signal required. No subscription. Operational from day one.
✅ You want a system that installs and works without a project — no calibration, no site survey, no IT review, no custom wiring. RioV360 ships with everything needed to mount, connect, and operate. Your team installs it and the machine is protected the same week.
Which Riodatos System Fits Your Operation?
🟨 RioV360 — 4 cameras, 130° each, 360° full perimeter coverage. AI pedestrian and vehicle detection. 10 workdays of on-device recording. The standard configuration for any machine with active pedestrian exposure on all sides. Ideal for: forklifts, heavy-duty forklifts, excavators, and scrapers.
🟧 RioV360-2 — 2 cameras, 260° front and rear coverage. AI detection in the primary travel directions. Built for machines on defined corridors. Expandable to RioV360. Ideal for: forklifts, telehandlers, dump trucks, and scrapers.
→ See RioD260
.webp)
Universal Fit for all types of Machines on Your Site
RioV360 installs on any heavy equipment. 12–24V DC compatible — no custom wiring.
● Forklifts: 360° coverage ● Heavy-Duty Forklifts: Four cameras cover the counterweight dead zone. ● Wheel Loaders: Full 360° coverage on large-frame machines. ● Excavators: Monitors the swing arc and ground-level zones. ● Dump Trucks: Forward, rear, and side cameras cover the extended blind zones. ● Telehandlers: Covers the blind zone that opens on the front right the moment the boom raises. ● Scrapers: Front camera active during the loading pass when the bowl drops. ● Skid Steers: Rear corners covered regardless of arm position.
Where an AI Safety System for Construction Equipment Fails Without Real-World Fit
FAQ - RioV360 - AI Pedestrian Detection System
Q: How does RioV360 work?
A: Four rugged AI cameras mount around the machine to deliver continuous 360° coverage. The on-device AI detects pedestrians and vehicles in real time and triggers instant visual and audible alerts in the cab, plus an External Flashing Beacon for ground workers. Everything processes and records locally — no cloud, no WiFi, no subscriptions.
Q: Does RioV360 require cloud, WiFi, or subscriptions?
A: No. RioV360 is a fully on-device system. All video recording and AI processing happen locally with no connectivity, no cloud, and no monthly subscriptions required.
Q: How much video does RioV360 record?
A: The included 512GB industrial SD card stores about 10 workdays of machine-on recording across all four cameras simultaneously. When full, the system automatically overwrites the oldest files. Critical footage can be locked with a long press to prevent overwriting.
Q: Which equipment is RioV360 compatible with?
A: RioV360 is compatible with any machine operating on 12–24V DC — forklifts, excavators, wheel loaders, dump trucks, telehandlers, skid steers, scrapers, and other industrial vehicles. No separate power source, no custom wiring.
Q: How are alerts delivered?
A: When AI detects a pedestrian or vehicle in the detection zone, the operator receives an immediate visual and audible alarm on the 7-inch in-cab monitor. Simultaneously, the External Flashing Beacon activates with 120dB voice alert, audible alarm, and flashing red light to warn workers on the ground.
Q: How do I access recorded footage?
A: Pull the SD card from the monitor and insert it into any laptop. No login, no dashboard, no uploads. Footage is organized in daily directories by date and time. For on-machine review, use the monitor's built-in playback menu.
Q: What is the warranty?
A: RioV360 carries an 18-month warranty against defects in materials and workmanship. Contact info@riodatos.com or 520-501-0602 directly — not a support ticket queue. Replacement part warranty.
Installation Kit Included
RioV360 installation kit supports your installation team. Instead of requiring installers to source mounting hardware, electrical components, and accessories, every essential element is included and aligned with the system’s design.
Optional Kits available
✔️ No-Drill Camera Kit — Magnetic camera mounting. For rental equipment or surfaces where drilling isn't an option.
✔️ Monitor Extension Kit — Articulating arm + clamp. Adjustable viewing and mounts to bars or overhead guards.
"We pulled the SD card on-site and reviewed footage from all four angles. It showed exactly what happened in the minutes before impact.
We resolved the insurance claim in days instead of weeks and used the video for operator training. This system paid for itself with that one incident."
— Safety Director, Southwest Construction Fleet (AZ)
Questions Before You Order
Call John directly: (520) 501-0602 or Email info@riodatos.com