Quote
Excavator on an urban foundation dig with workers inside the rear swing radius

Excavator Camera System Fitment Guide

Find your excavator, match the size class, and order the right RioV360 kit.

This guide groups excavators by operating weight, from 1-ton minis to mining machines, with the RioV360 kit, power connection, accessories and camera layout for each class. Find your Cat, Deere, Komatsu, Volvo, Hitachi, Kubota, Bobcat, Takeuchi, Case or Develon model and order with confidence.

How to Use This Excavator Camera Fitment Guide

  1. Find your brand and model in the table below. The number in the model name usually sets the size class.
  2. Match the size class to its power connection and accessories. Minis run 12 V, full-size machines run 24 V. RioV360 runs on both.
  3. Confirm the model and voltage on the machine data plate. Model ranges change by year and region.
  4. Plan the layout on the upper structure: counterweight, right rail and left rear corner, plus the monitor in the cab.
  5. Order the complete kit plus any accessories listed for your class.

Take it to the shop floor. The printable fitment guide has the size class and brand tables, power connections, camera and beacon layout, accessories and PILOT unit details in a PDF.

Excavator Camera System Fitment by Size Class

Size classOperating weightPowerRioV360 power connectionRioV360 AccessoriesNotes
MiniUnder about 6 t (13,000 lb)12 VDirect: 12 V key-switched circuitRV360-EXT, RV360-512, RV360-MAGCanopy: mount on the ROPS. Zero-tail-swing: rear camera on top of the counterweight.
MidiAbout 6 to 10 t12 V on most, some 24 VDirect: 12 V or 24 V key-switched circuitRV360-EXT, RV360-512, RV360-MAGCheck the voltage on the battery or data plate. RioV360 runs on either.
MediumAbout 10 to 30 t24 VDirect: 24 V key-switched circuitRV360-EXT, RV360-CBX, RV360-512Most common contractor size. Right side is the biggest blind spot.
LargeAbout 30 to 50 t24 VDirect: 24 V key-switched circuitRV360-EXT, RV360-CBX, RV360-512CBX cables reach the counterweight and right rail.
Mass / MiningOver about 50 t24 VDirect: 24 V key-switched circuitRV360-EXT, RV360-CBX, RV360-512Confirm cable lengths with us. Mount cameras low enough to see 0 to 5 m.
WheeledAbout 14 to 25 t24 VDirect: 24 V key-switched circuitRV360-EXT, RV360-CBX, RV360-512Cat M314 to M320, Volvo EW160E to EW220E, Develon DX140W to DX210W.
Battery ElectricMostly minisLow-voltage accessory circuitKey-switched 12 V accessory circuit, or RV360-DCCRV360-EXT, RV360-512, RV360-DCC if neededVolvo EC18 Electric, Bobcat E10e, Takeuchi TB20e. Never connect to the drive battery.

Excavator Models by Brand and Size Class

BrandMiniMidiMediumLargeMass / Mining
Cat301.5, 301.7, 302, 302.7, 303, 303.5, 304, 305 CR306, 308, 309, 310313, 315, 317, 320, 323, 326330, 335, 336, 340352, 374, 395
John Deere17, 26, 30, 35, 50, 60 P-Tier75, 85130, 160, 210, 245, 250, 300345, 350, 380, 470510, 670, 870
KomatsuPC30MR to PC55MRPC78US, PC88MRPC130LC to PC290LCPC360LC, PC390LC, PC490LCPC2000 and larger
VolvoEC18 Electric, ECR18 to ECR58EC60, ECR88EC140 to EC230, ECR145, ECR235EC370, EC400EC500, EC750
HitachiZX17U to ZX60USBZX75US, ZX85USBZX130 to ZX300LCZX345USLC, ZX350LC, ZX490LCZX690LC, ZX890LC
KubotaK008, U10 to U55, KX030 to KX057KX080Not listedNot listedNot listed
BobcatE10 to E55E60, E88E145, E165, E220Not listedNot listed
TakeuchiTB210R to TB250-2, TB20eTB260, TB370, TB280FR, TB290TB2150Not listedNot listed
CaseCX17C to CX57CCX60C, CX80CCX140E to CX300ECX380ECX750D
DevelonDX17Z to DX55RDX62R, DX63, DX89RDX140LC to DX300LCDX350LCDX800LC, DX1000LC

Older Excavators

BrandOlder seriesHow to match
CatB, C, D, E and F series, early Next GenA 320E or 320D fits like the current 320
John DeereC, D and G seriesA 210G LC fits like the current 210
KomatsuDash 7 through Dash 10A PC210LC-10 fits like the PC210LC-11
VolvoB, C, D and E seriesAn EC220E fits like the EC220
HitachiDash 3, 5 and 6A ZX210LC-6 fits like the ZX210LC-7
DevelonDoosan and Daewoo DX and Solar modelsA Doosan DX225LC-5 fits like the DX225LC-7

Older excavators fit by operating weight. The number sets the size and the letter or dash number sets the generation, so an older generation fits like the current model with the same number. Not listed? Send the make and model and we will confirm the kit within one business day.

Size classes, weights and model lists are approximate and vary by year, region and configuration. Brand and model names are trademarks of their owners. RioDatos is not affiliated with or endorsed by any manufacturer listed. Model names are used only to identify compatible machines.

Excavator Camera System Power: 12 V, 24 V and Electric

  • Mini and most midi excavators: 12 V system. Connect to a fused, key-switched 12 V circuit and the constant 12 V line, as the user manual shows.
  • Medium, large and mining excavators: 24 V system, two 12 V batteries in series. RioV360 connects directly, with no converter.
  • Wheeled excavators: 24 V system, same connection as crawler machines of the same size.
  • Battery-electric excavators: connect to the key-switched 12 V accessory circuit. If there is none, add the RV360-DCC isolated DC-DC converter. Never connect to the drive battery.

RioV360 User Manual: installation, settings and troubleshooting. Download the RioV360 User Manual (PDF, v4.4).

RioV360 camera layout on an excavator working in a quarry

Camera / Beacon Layout for Excavators

  • Rear: on the counterweight, aimed down at the swing radius. On zero-tail-swing machines, mount on top of the counterweight.
  • Right side: on the right upper deck rail, aimed down along the track. The right side is the operator's biggest blind spot.
  • Left side: on the rear-left upper corner, aimed forward along the track and the swing path.
  • Front (optional fourth): on the cab roof front edge, looking at the bucket work zone and travel path.
  • Monitor: on the front-right cab pillar with the RV360-EXT kit, clear of the window wiper and joystick reach.
  • Beacon: on the counterweight or the cab roof rear, where ground crews can see and hear it.

Mounting on the upper structure means the cameras swing with the operator, so the monitor view always matches where the operator is facing. On canopy minis, mount the cameras on the ROPS canopy frame.

No tags for workers to wear: the AI cameras detect any person in the zone.

RioV360 Accessories in This Guide

  • RV360-EXT: Monitor Extension and Mounting Kit: rail clamp, round base, cab-frame bracket or T-attachment.
  • RV360-CBX: Extension Cables: two 3 m and two 5 m camera cables plus a 5 m monitor cable for long upper decks.
  • RV360-512: Upgraded Storage: 512GB card for about 60 hours of continuous video.
  • RV360-MAG: Magnetic Camera Mounts: no-drill mounting on the steel cab and counterweight, ideal for trial positions (US shipments).
  • RV360-DCC: Isolated DC-DC Converter: for battery-electric excavators with no low-voltage circuit. Priced on quote.

PILOT Unit Program

Prove It on Your Excavator Before You Commit

Put RioV360 on the excavator with the most people around it and let your operators, foremen and EHS team see it work on your own site. No long trial agreements and no software to set up. Install it, run it, and decide.

$500 offPILOT discount applies to all RioV360 units through December 31, 2026
  1. Pick the excavatorChoose the machine with the most people working inside the swing radius.
  2. OrderSend the make, model and serial number. Pay by credit card.
  3. Ships fastIn-stock units ship from Arizona in 2 business days.
  4. InstallFollow the user manual and the layout in this guide.
  5. Roll outUse the same kit and layout across the rest of the fleet.

Included with the PILOT unit: 4 AI cameras, 7 inch monitor, 120 dB voice beacon, 256GB card, wiring harness, mounting hardware, user manual and 18-month warranty. Phone, email or Teams support for your installer.

Recommended PILOT Unit Accessories

RV360-512

Upgraded Storage

512GB high endurance card for about 60 hours of continuous video.

RV360-EXT

Monitor Extension and Mounting Kit

Rail clamp, round base, cab-frame bracket or T-attachment.

RV360-MAG

Magnetic Camera Mounting Kit

No-drill camera mounts to trial positions on the cab and counterweight.

RV360-CBX

Extension Cables

Camera and monitor extensions for medium and larger excavators.

Frequently Asked Questions

Does RioV360 fit mini excavators?

Yes. Minis run a 12 V system and RioV360 runs on 8 to 32 V, so it connects directly. On canopy machines the cameras mount on the ROPS canopy.

Where do the cameras go on an excavator that swings?

On the upper structure: counterweight, right deck rail and rear-left corner, with an optional front camera. They swing with the operator, so the monitor always shows what is around the cab.

Does RioV360 work on electric excavators?

Yes. Connect to the key-switched 12 V accessory circuit. If the machine has none, add the RV360-DCC isolated converter.

Do workers need to wear tags?

No. RioV360 uses AI cameras to detect any person in the zone, with nothing to wear or charge.

More for these sites: excavator camera system, construction pedestrian detection and mining and quarry pedestrian detection.

Request an Excavator Camera System Quote

Send your excavator makes, models and quantities. Within one business day, we will email pricing, the recommended kit and accessories.

Prefer to talk? Call John directly at +1 (520) 501-0602 or email info@riodatos.com.

Get RioV360 Pricing by Email

Just your name and email. Pricing, the recommended kit and specs arrive within one business day.

No phone number needed. No sales calls unless you ask.