
Toyota Forklift Camera and Pedestrian Detection Fitment Guide
Find your Toyota series, match the power, and order the right RioV360 kit.
This guide lists Toyota forklift series by model code with the RioV360 kit, power connection, accessories and install notes for each. Gas, LP and diesel trucks connect directly. Electric trucks use their low-voltage accessory circuit.
How to Use This Toyota Forklift Pedestrian Detection Guide
- Find your Toyota series in the table below.
- Match the power column to your machine. RioV360 runs on 8 to 32 V DC, so most machines connect directly to the switched ignition circuit.
- Confirm the model and voltage on the machine data plate. Model ranges change by year and region.
- Check attachments. Side shifters, clamps and long forks can change where cameras need to go.
- Order the complete kit, plus any accessories listed for your series.
Take it to the shop floor. The printable Toyota Forklift Fitment Guide has the full series tables, power connections, camera and beacon layout, accessories and PILOT unit details in a 3-page PDF.
Toyota Forklift Pedestrian Detection by Series
| Series | Models | Model years | Capacity | Power | RioV360 power connection | RioV360 Accessories | Notes |
|---|---|---|---|---|---|---|---|
| Core IC Pneumatic | 8FGU15 to 8FGU32 (gas/LP), 8FDU15 to 8FDU32 (diesel) | 2007 to present | 3,000 to 6,500 lb | 12 V | Direct: 12 V key-switched circuit | RV360-EXT, RV360-512 | Outdoor yards and docks. Rear camera on the counterweight or overhead guard. |
| Core IC Cushion | 8FGCU15 to 8FGCU32, 8FGCSU20 | 2007 to present | 3,000 to 6,500 lb | 12 V | Direct: 12 V key-switched circuit | RV360-EXT, RV360-512 | Indoor and dock work. RV360-MAG speeds installs on steel guards. |
| Large IC Cushion | 8FGC35U to 8FGC70U | About 2010 to present | 7,000 to 15,500 lb | 12 V | Direct: 12 V key-switched circuit | RV360-EXT, RV360-CBX, RV360-512 | Longer trucks: add RV360-CBX for the front camera run. |
| Core Electric (4-wheel) | 8FBC15U, 8FBC18U, 8FBCU20 to 8FBCU32, 8FBCHU25, 8FBCH32U | About 2010 to present | 3,000 to 6,500 lb | 36 or 48 V battery | Truck accessory circuit (12/24 V, key-switched). Fallback: RV360-DCC | RV360-EXT, RV360-512, RV360-DCC if needed | Most common Toyota warehouse truck. |
| 3-Wheel Electric | 8FBE15U to 8FBE20U, 8FBES15U, 8FBEH18U | Current | 3,000 to 4,000 lb | 36 V battery | Truck accessory circuit (12/24 V, key-switched). Fallback: RV360-DCC | RV360-EXT, RV360-512, RV360-DCC if needed | Tight turning radius: side cameras matter most. |
| 48V Electric Pneumatic | 8FBM16T to 8FBM20T | Current | 3,000 to 4,000 lb | 48 V battery | Truck accessory circuit (12/24 V, key-switched). Fallback: RV360-DCC | RV360-EXT, RV360-512, RV360-DCC if needed | Outdoor electric. Confirm the accessory circuit voltage. |
| 80V Electric Pneumatic | 9FBM20T to 9FBM35T, 8FBM40T to 8FBM50T, 9FBM60T to 9FBM80T, 9FBH80T | Current | 4,000 to 17,500 lb | 80 V battery | Truck accessory circuit (12/24 V, key-switched). Fallback: RV360-DCC | RV360-EXT, RV360-512, RV360-DCC if needed | Never connect RioV360 to the 80 V traction battery. |
| Large Electric | 7FBCU35 to 7FBCU55 | Current | 7,000 to 11,000 lb | 36 or 48 V battery | Truck accessory circuit (12/24 V, key-switched). Fallback: RV360-DCC | RV360-EXT, RV360-512, RV360-DCC if needed | Add RV360-CBX on long chassis. |
| High-Capacity Electric Cushion | THDE1500 to THDE4000 | Current | 15,000 to 40,000 lb | 72 or 80 V battery | Truck accessory circuit (12/24 V, key-switched). Fallback: RV360-DCC | RV360-EXT, RV360-CBX, RV360-512, RV360-DCC if needed | Large trucks: detection covers 0 to 5 m from each camera. |
| High-Capacity IC Pneumatic | THD3000 to THD12500 | Current | 30,000 to 125,000 lb | 12 or 24 V (check the machine) | Direct: key-switched circuit | RV360-EXT, RV360-CBX, RV360-512 | Ports, steel and intermodal. Mount cameras high on the counterweight and cab. |
| High-Capacity Large IC Cushion | THDC series | Current | 25,000 to 100,000 lb | 12 V | Direct: 12 V key-switched circuit | RV360-EXT, RV360-CBX, RV360-512 | Indoor heavy lift. Plan cable runs before drilling. |
Older Toyota Forklifts
| Series | Models | Model years | Power | RioV360 power connection | Notes |
|---|---|---|---|---|---|
| 7-Series IC | 7FGU, 7FDU, 7FGCU, 7FGCSU | About 1999 to 2007 | 12 V | Direct: 12 V key-switched circuit | Same layout as the 8-Series. Check guard condition before mounting. |
| 7-Series Electric | 7FBCU, 7FBEU, 7FBMF | About 2000 to 2011 | 36 or 48 V battery | Truck accessory circuit (12/24 V, key-switched). Fallback: RV360-DCC | Use the lights or horn circuit, switched by the key. |
| 6-Series IC | 6FGU, 6FDU, 6FGCU | About 1995 to 1999 | 12 V | Direct: 12 V key-switched circuit | Inspect wiring and the fuse block first. |
| 5-Series and older | 5FGU, 5FGC, 5FBCU and earlier | Before about 1995 | 12 V (IC) or battery voltage (electric) | IC: direct 12 V. Electric: accessory circuit or RV360-DCC | Send the data plate photo and we will confirm. |
Model years are approximate. Toyota starts a new serial number range for each model, so the exact build date comes from the model and serial number on the data plate. Your Toyota dealer can confirm it.
Toyota is a trademark of its owner. RioDatos is not affiliated with or endorsed by Toyota. Model names are used only to identify compatible machines.
Toyota Forklift Pedestrian Detection Power: IC and Electric
- Gas, LP and diesel: 12 V system. Connect to a fused, key-switched 12 V circuit and the constant 12 V line, as the user manual shows.
- Electric: 36, 48, 72 or 80 V traction battery. Never connect RioV360 to the traction battery.
- Accessory circuit: electric trucks run lights, horn and dash on a key-switched 12 or 24 V circuit. A qualified installer can tap it, with no converter needed.
- No low-voltage circuit: add the RV360-DCC isolated DC-DC converter. Electric forklift batteries are isolated from the frame, so the converter must be isolated too, to avoid ground faults.
RioV360 User Manual: installation, settings and troubleshooting. Download the RioV360 User Manual (PDF, v4.4).

Camera / Beacon Layout for Toyota Forklifts
- Rear: on the counterweight or the rear overhead guard crossbar, aimed at the reverse path.
- Sides: on the overhead guard posts, aimed along the turning arc.
- Front: on the front overhead guard crossbar, looking past the load and mast.
- Monitor: on the overhead guard post or dash with the RV360-EXT kit. Beacon high on the rear guard where people on foot can see and hear it.
No tags for workers to wear: the AI cameras detect any person in the zone. A common alternative layout is two cameras forward, one rear and a side curtain zone on the passenger side.
RioV360 Accessories in This Guide
- RV360-EXT Monitor Extension and Mounting Kit: rail clamp, round base, cab-frame bracket or T-attachment for the 7 inch monitor.
- RV360-CBX Extension Cables: two 3 m and two 5 m camera cables plus a 5 m monitor cable for long machines.
- RV360-512 Upgraded Storage: 512GB card for about 60 hours of continuous video (256GB, about 30 hours, ships with each system).
- RV360-MAG Magnetic Camera Mounts: no-drill mounting for steel surfaces (US shipments).
- RV360-DCC Isolated DC-DC Converter: for high-voltage electric trucks with no low-voltage circuit. Priced on quote.
PILOT Unit Program
Prove It on Your Toyota Before You Commit
Put RioV360 on your highest-risk Toyota forklift and let your operators, supervisors and EHS team see it work in your own operation. No long trial agreements and no software to set up. Install it, run it, and decide.
- Pick the truckChoose the forklift with the most foot traffic or the worst blind spots.
- OrderSend the model and serial number. Pay by credit card.
- Ships fastIn-stock units ship from Arizona in 2 business days.
- InstallMost teams finish in under 2 hours with the user manual.
- Roll outUse the same kit and layout across the rest of the fleet.
Included with the PILOT unit: 4 AI cameras, 7 inch monitor, 120 dB voice beacon, 256GB card, wiring harness, mounting hardware, user manual and 18-month warranty. Phone, email or Teams support for your installer.
Recommended PILOT Unit Accessories
Upgraded Storage
512GB high endurance card for about 60 hours of continuous video.
Monitor Extension and Mounting Kit
Rail clamp, round base, cab-frame bracket or T-attachment.
Magnetic Camera Mounting Kit
No-drill camera mounts for steel guards and counterweights.
Bench Test AC Power Adapter
Run the system from a wall outlet and learn it on a table before install.
Frequently Asked Questions
Does RioV360 fit Toyota electric forklifts?
Yes. Toyota electric forklifts run 36, 48, 72 or 80 V traction batteries. RioV360 connects to the truck's low-voltage accessory circuit, switched by the key. If none is available, the RV360-DCC isolated converter supplies 12 V.
Does RioV360 fit Toyota gas, LP and diesel forklifts?
Yes. Toyota IC forklifts run a 12 V system, which RioV360 uses directly. No converter is needed.
Will RioV360 work with Toyota forklift attachments?
Yes. Camera positions are set for each truck. Side shifters, clamps and long forks can change the front camera position, so plan the mount with the attachment fitted.
Can I put RioV360 on a Toyota THD high-capacity forklift?
Yes. Add RV360-CBX extension cables for the longer runs. Each camera detects people from 0 to 5 m, so mount cameras where the near zone matters most.
Do workers need to wear tags?
No. RioV360 uses AI cameras to detect any person in the zone, with nothing to wear or charge.
Request a Toyota Forklift Pedestrian Detection Quote
Send your model numbers and quantities. Within one business day, we will email pricing, the recommended kit and accessories.
Prefer to talk? Call John directly at +1 (520) 501-0602 or email info@riodatos.com.
