Quote
Workers on foot near heavy handling equipment in a port yard

Material Handler Camera System Fitment Guide

Find your handler, match the size class, and order the right RioV360 kit.

This guide groups material handlers by operating weight, with the RioV360 kit, power connection, accessories and camera layout for elevating cabs and rotating uppers. Find your Sennebogen, Liebherr, Fuchs, Cat or Volvo model and order with confidence.

How to Use This Material Handler Camera Fitment Guide

  1. Find your brand and model in the table below. The model number usually sets the size class.
  2. Match the size class to its power connection and accessories. Material handlers run 24 V, so RioV360 connects directly.
  3. Confirm the model and voltage on the machine data plate. Model ranges change by year and region.
  4. Plan the elevating cab route. The monitor rides with the cab, so its cable follows the cab lift with a service loop.
  5. Order the complete kit with RV360-CBX extension cables, plus any accessories listed for your class.

Take it to the shop floor. The printable fitment guide has the size class and brand tables, power connections, camera and beacon layout, accessories and PILOT unit details in a PDF.

Material Handler Camera System Fitment by Size Class

Size classOperating weightPowerRioV360 power connectionRioV360 AccessoriesNotes
CompactUnder about 30 t (66,000 lb)24 VDirect: 24 V key-switched circuitRV360-EXT, RV360-CBX, RV360-512Waste sorting, recycling and indoor work. Run the monitor cable up the cab lift with a service loop.
MediumAbout 30 to 55 t24 VDirect: 24 V key-switched circuitRV360-EXT, RV360-CBX, RV360-512Scrap, timber and pipe yards. Rear camera on the counterweight, side cameras on the upper deck rails.
LargeAbout 55 to 100 t24 VDirect: 24 V key-switched circuitRV360-EXT, RV360-CBX, RV360-512Log loaders and pipe handling, Sennebogen 850 class. Plan the cable route up the elevating cab before drilling.
Port / HeavyOver about 100 t24 VDirect: 24 V key-switched circuitRV360-EXT, RV360-CBX, RV360-512Very long cable runs: confirm lengths with us. Detection covers 0 to 5 m, so mount cameras low enough to see the ground.
Electric DriveAny sizeMains power, 24 V control circuit24 V key-switched control circuitRV360-EXT, RV360-CBX, RV360-512Electric handlers still run 24 V controls and lights. Never connect to the mains supply.

Material Handler Models by Brand and Size Class

BrandCompactMediumLargePort / Heavy
Sennebogen817, 818, 821, 822, 825830, 835, 840850, 855, 860, 870875, 885, 895
LiebherrLH 22, LH 24, LH 26LH 30, LH 35, LH 40, LH 50LH 60, LH 80LH 110, LH 120, LH 150
FuchsMHL320, MHL331, MHL335MHL340, MHL350, MHL360, MHL370MHL390Not listed
CatMH3022, MH3024, MH3026MH3040, MH3050, MH3250MH3260Not listed
VolvoEW200E MH, EW240E MHNot listedNot listedNot listed

Older Material Handlers

BrandOlder seriesHow to match
SennebogenC, D and earlier E-SeriesAn 835 M or 850 R of any series fits like the current model
LiebherrA 900 and R 900 handler versions, earlier LH generationsA 924 C and A 934 C fit Compact and Medium by weight
FuchsD and E series, Terex FuchsMHL350 D fits like the MHL350
CatM318D MH, M322D MH, M325D L MHM325D L MH fits like the MH3040
VolvoEW210D MHFits like the EW200E MH

Older handlers fit by operating weight. The model number usually sets the class, so an older generation fits like the current model with the same number. Not listed? Send the make and model and we will confirm the kit within one business day.

Size classes, weights and model lists are approximate and vary by year, region and undercarriage (wheeled, crawler, pedestal or rail). Brand and model names are trademarks of their owners. RioDatos is not affiliated with or endorsed by any manufacturer listed. Model names are used only to identify compatible machines.

Material Handler Camera System Power: 24 V, Electric and Hybrid

  • Diesel handlers: 24 V system. Connect to a fused, key-switched 24 V circuit and the constant 24 V line on the upper structure, as the user manual shows.
  • Electric drive handlers: mains-powered machines still run a battery-assisted 24 V control and lighting circuit. Connect there, never to the mains supply.
  • Hybrid handlers: same 24 V control circuit as diesel models.
  • Elevating cab: take power from the upper structure fuse panel and run the monitor cable through the cab lift beside the cab's own harness.

RioV360 User Manual: installation, settings and troubleshooting. Download the RioV360 User Manual (PDF, v4.4).

RioV360 IP69K rated AI camera for material handler counterweights and upper decks

Camera / Beacon Layout for Material Handlers

  • Rear: on the counterweight, aimed down at the swing radius and reverse path. The counterweight swing is the biggest danger to people on foot.
  • Sides: on the upper deck rails or upper corners, aimed down along the tires or tracks and the swing path.
  • Front: on the upper structure below the boom foot, looking at the travel path. Not on the elevating cab, which moves.
  • Monitor: inside the elevating cab with the RV360-EXT kit, so it rides with the operator.
  • Beacon: high on the counterweight, where ground crews can see and hear it.

Mounting on the upper structure means the cameras swing with the operator, so the monitor view always matches where the operator is facing. Check the cable loop at full cab height and full forward travel before tying it down.

No tags for workers to wear: the AI cameras detect any person in the zone.

RioV360 Accessories in This Guide

  • RV360-CBX: Extension Cables: two 3 m and two 5 m camera cables plus a 5 m monitor cable for the elevating cab and long uppers.
  • RV360-EXT: Monitor Extension and Mounting Kit: rail clamp, round base, cab-frame bracket or T-attachment.
  • RV360-512: Upgraded Storage: 512GB card for about 60 hours of continuous video.
  • RV360-PWR: Bench Test AC Power Adapter: run the system from a wall outlet and learn it on a table before install.

PILOT Unit Program

Prove It on Your Handler Before You Commit

Put RioV360 on your busiest material handler and let your operators, supervisors and EHS team see it work in your own yard. No long trial agreements and no software to set up. Install it, run it, and decide.

$500 offPILOT discount applies to all RioV360 units through December 31, 2026
  1. Pick the handlerChoose the machine with the most foot traffic around the swing radius.
  2. OrderSend the make, model and serial number. Pay by credit card.
  3. Ships fastIn-stock units ship from Arizona in 2 business days.
  4. InstallFollow the user manual and the elevating cab notes in this guide.
  5. Roll outUse the same kit and layout across the rest of the yard.

Included with the PILOT unit: 4 AI cameras, 7 inch monitor, 120 dB voice beacon, 256GB card, wiring harness, mounting hardware, user manual and 18-month warranty. Phone, email or Teams support for your installer.

Recommended PILOT Unit Accessories

RV360-CBX

Extension Cables

Camera and monitor extensions for the elevating cab and long upper structure.

RV360-EXT

Monitor Extension and Mounting Kit

Rail clamp, round base, cab-frame bracket or T-attachment.

RV360-512

Upgraded Storage

512GB high endurance card for about 60 hours of continuous video.

RV360-PWR

Bench Test AC Power Adapter

Run the system from a wall outlet and learn it on a table before install.

Frequently Asked Questions

Does RioV360 fit Sennebogen material handlers?

Yes. From the 817 to the 895, Sennebogen handlers run a 24 V system, which RioV360 uses directly. RioV360 is running today on a Sennebogen 850 and on elevating-cab log loaders.

How does the monitor cable reach an elevating cab?

It follows the cab's own harness through the cab lift, with a service loop sized for full height and full forward travel. RV360-CBX supplies the extra length.

Where do the cameras go on a machine that rotates?

On the upper structure: counterweight, deck rails and below the boom foot. They swing with the operator, so the monitor always shows what is around the cab.

Does RioV360 work on electric material handlers?

Yes. Electric drive handlers still run a 24 V control and lighting circuit. RioV360 connects there, never to the mains supply.

Do workers need to wear tags?

No. RioV360 uses AI cameras to detect any person in the zone, with nothing to wear or charge.

More for these yards: port terminal pedestrian detection and waste and recycling pedestrian detection.

Request a Material Handler Camera System Quote

Send your material handler makes, models and quantities. Within one business day, we will email pricing, the recommended kit and accessories.

Prefer to talk? Call John directly at +1 (520) 501-0602 or email info@riodatos.com.

Get RioV360 Pricing by Email

Just your name and email. Pricing, the recommended kit and specs arrive within one business day.

No phone number needed. No sales calls unless you ask.