
Heavy-Duty Forklift and Reach Stacker Camera Fitment Guide
Find your big truck, match the class, and order the right RioV360 kit.
This guide groups heavy-duty forklifts, container handlers and reach stackers by class, with the RioV360 kit, power connection, accessories and camera layout for each. Find your Hyster, Kalmar, Taylor, Konecranes, Cat, Toyota, Yale or Bobcat model and order with confidence.
How to Use This Heavy-Duty Forklift and Reach Stacker Fitment Guide
- Find your brand and model in the table below.
- Match the class to its power connection and accessories. Most big trucks run 24 V, and RioV360 connects directly.
- Confirm the model and voltage on the data plate. Model ranges change by year and region.
- Plan long cable runs before drilling. Elevated and offset cabs need RV360-CBX extension cables.
- Order the complete kit plus any accessories listed for your class.
Take it to the shop floor. The printable fitment guide has the class and brand tables, power connections, camera and beacon layout, accessories and PILOT unit details in a PDF.
Heavy-Duty Forklift and Reach Stacker Fitment by Class
| Class | Capacity | Power | RioV360 power connection | RioV360 Accessories | Notes |
|---|---|---|---|---|---|
| High-Capacity Forklift | About 15,000 to 36,000 lb | 12 V or 24 V | Direct: 12 V or 24 V key-switched circuit | RV360-EXT, RV360-CBX, RV360-512 | Steel, lumber, concrete and ports. Load and mast block the forward view. |
| Heavy Forklift | Over 36,000 lb | 24 V | Direct: 24 V key-switched circuit | RV360-EXT, RV360-CBX, RV360-512 | Long wheelbase and wide counterweight. Mount cameras high enough to see 0 to 5 m. |
| Container Handler | Empty and laden, masted | 24 V | Direct: 24 V key-switched circuit | RV360-EXT, RV360-CBX, RV360-512 | Spreader and container block the view ahead. Front camera low on the frame. |
| Reach Stacker | About 10 to 130 t | 24 V | Direct: 24 V key-switched circuit | RV360-EXT, RV360-CBX, RV360-512 | Boom over the cab. Cameras on the chassis, never on the boom. |
| Battery Electric | All classes | High-voltage battery | Key-switched 24 V accessory circuit, or RV360-DCC | RV360-EXT, RV360-CBX, RV360-512, RV360-DCC if needed | Taylor ZH and ZLC, Kalmar electric and Hyster J-XD. Never connect to the traction battery. |
Big Truck Models by Brand and Class
| Brand | High-Capacity Forklift | Heavy Forklift | Container Handler | Reach Stacker |
|---|---|---|---|---|
| Hyster | H190-280XD, H300-360XD | H400-450XD, H550-700XD, H800-1050XD | H1050-1150XD-CH and empty handlers | RS45, RS46 |
| Kalmar | DCG160 and DCE160 range | Heavy forklift range | Empty container handlers | Gloria DRG420-450, DRG100, Super Gloria DRG450-1300, ERG450 electric |
| Taylor | X-160, XH-180, X-360M, X-360L, ZH-360L electric | XH-300L, X-620RR, X-1250 | XEC-155/6, XLC-975, XLC-976, ZLC electric | XRS-1180, ZRS-1272 electric |
| Konecranes | SMV forklifts | SMV heavy forklifts | SMV empty container handlers | SMV 4531 and 4538 series |
| Toyota | THD3000 to THD3600 | THD4000 to THD12500 | Not listed | Not listed |
| Cat Lift Trucks | DP60HP-DP100CP | Not listed | Not listed | Not listed |
| Yale | GP190VX, GP230SDF | GP330EF and larger | Not listed | Not listed |
| Bobcat / Doosan | D100S-9, D120S-9, D140S-9 | D160S-9, DV160S-9 | Not listed | Not listed |
Older Big Trucks
| Brand | Older series | How to match |
|---|---|---|
| Hyster | H190-360HD, HD2, older RS reach stackers | Fits like the current XD or RS of the same class |
| Kalmar | DCE and DRF series, earlier DRG | A DRF450 fits like the DRG450 |
| Taylor | Earlier X and XH series | Same 24 V connection as the current model |
| Konecranes / SMV | Earlier SMV forklifts and reach stackers | Match by class and voltage |
Older big trucks fit by class and voltage. Most run 24 V and connect directly. Not listed? Send the make and model and we will confirm the kit within one business day.
Classes, capacities and model lists are approximate and vary by year, region and configuration. Brand and model names are trademarks of their owners. RioDatos is not affiliated with or endorsed by any manufacturer listed. Model names are used only to identify compatible machines.
Heavy-Duty Forklift Camera System Power: 12 V, 24 V and Electric
- Diesel big trucks and reach stackers: most run 24 V. Connect to a fused, key-switched 24 V circuit and the constant 24 V line, as the user manual shows.
- High-capacity forklifts: some run 12 V. RioV360 runs on 8 to 32 V DC and connects directly to either. Check the data plate.
- Battery-electric big trucks: connect to the key-switched low-voltage accessory circuit. If there is none, add the RV360-DCC isolated DC-DC converter. Never connect to the traction battery.
RioV360 User Manual: installation, settings and troubleshooting. Download the RioV360 User Manual (PDF, v4.4).

Camera / Beacon Layout for Big Trucks and Reach Stackers
- Rear: high on the counterweight, aimed down at the reverse path.
- Sides: on the frame corners or fenders, aimed along the turning arc and the wheels.
- Front: low on the front frame, looking under the load, mast, spreader or boom at the travel path.
- Monitor: inside the cab with the RV360-EXT kit, clear of the forward view.
- Beacon: high on the counterweight or cab roof rear, where ground crews can see and hear it.
Mount on the chassis and counterweight, never on the mast, boom or spreader, so the view stays steady. On reach stackers with sliding or elevating cabs, leave a service loop in the monitor cable for full cab travel.
No tags for workers to wear: the AI cameras detect any person in the zone.
RioV360 Accessories in This Guide
- RV360-CBX: Extension Cables: two 3 m and two 5 m camera cables plus a 5 m monitor cable for long machines.
- RV360-EXT: Monitor Extension and Mounting Kit: rail clamp, round base, cab-frame bracket or T-attachment.
- RV360-512: Upgraded Storage: 512GB card for about 60 hours of continuous video.
- RV360-MAG: Magnetic Camera Mounts: no-drill mounting on steel surfaces, ideal for trial positions (US shipments).
- RV360-DCC: Isolated DC-DC Converter: for electric machines with no low-voltage circuit. Priced on quote.
PILOT Unit Program
Prove It on Your Big Truck Before You Commit
Put RioV360 on the big truck with the most people around it and let your operators, supervisors and EHS team see it work in your own yard. No long trial agreements and no software to set up. Install it, run it, and decide.
- Pick the machineChoose the machine with the most people working around it.
- OrderSend the make, model and serial number. Pay by credit card.
- Ships fastIn-stock units ship from Arizona in 2 business days.
- InstallFollow the user manual and the layout in this guide.
- Roll outUse the same kit and layout across the rest of the fleet.
Included with the PILOT unit: 4 AI cameras, 7 inch monitor, 120 dB voice beacon, 256GB card, wiring harness, mounting hardware, user manual and 18-month warranty. Phone, email or Teams support for your installer.
Recommended PILOT Unit Accessories
Extension Cables
Camera and monitor extensions for long frames and elevated cabs.
Upgraded Storage
512GB high endurance card for about 60 hours of continuous video.
Monitor Extension and Mounting Kit
Rail clamp, round base, cab-frame bracket or T-attachment.
Magnetic Camera Mounting Kit
No-drill camera mounts to trial positions on steel surfaces.
Frequently Asked Questions
Does RioV360 fit Kalmar and Hyster reach stackers?
Yes. Reach stackers run 24 V, which RioV360 uses directly. Cameras mount on the chassis and counterweight, not the boom.
Does RioV360 work on electric container handlers?
Yes. Connect to the key-switched low-voltage accessory circuit. If there is none, add the RV360-DCC isolated converter.
Where does the front camera go on a container handler?
Low on the front frame, looking under the spreader and container at the travel path, where the operator's view is blocked.
Do workers need to wear tags?
No. RioV360 uses AI cameras to detect any person in the zone, with nothing to wear or charge.
More for these yards: heavy-duty forklifts, port terminal pedestrian detection and forklift guides by brand.
Request a Heavy-Duty Forklift Camera System Quote
Send your big truck and container handler makes, models and quantities. Within one business day, we will email pricing, the recommended kit and accessories.
Prefer to talk? Call John directly at +1 (520) 501-0602 or email info@riodatos.com.
