
Skid Steer and Track Loader Camera System Fitment Guide
Find your machine, match the frame size, and order the right RioV360 kit.
This guide groups skid steers and compact track loaders by frame size, with the RioV360 kit, power connection, accessories and camera layout for each. Find your Bobcat, Cat, Deere, Case, Kubota, Takeuchi, JCB, New Holland, Gehl or ASV model and order with confidence.
How to Use This Skid Steer Camera Fitment Guide
- Find your brand and model in the table below. Skid steers and track loaders with the same frame share the same layout.
- Match the frame size to its power connection and accessories. Skid steers and track loaders run 12 V, so RioV360 connects directly.
- Confirm the model and voltage on the machine data plate. Model ranges change by year and region.
- Check the door and lift arms. Front-entry and side-entry doors, and radial or vertical lift arms, change where the monitor and cameras go.
- Order the complete kit, plus any accessories listed for your frame size.
Take it to the shop floor. The printable fitment guide has the frame size and brand tables, power connections, camera and beacon layout, accessories and PILOT unit details in a PDF.
Skid Steer and Track Loader Camera Fitment by Frame Size
| Frame size | Rated operating capacity | Power | RioV360 power connection | RioV360 Accessories | Notes |
|---|---|---|---|---|---|
| Ultra-Compact | Under about 1,000 lb | 12 V | Direct: 12 V key-switched circuit | RV360-EXT, RV360-512 | Very little room in the cab. Mount the monitor on a ROPS post and keep cables inside the cage. |
| Small Frame | About 1,000 to 1,750 lb | 12 V | Direct: 12 V key-switched circuit | RV360-EXT, RV360-512, RV360-MAG | Landscaping, ag and rental. Rear camera on the rear door or the ROPS crossbar above it. |
| Medium Frame | About 1,750 to 2,500 lb | 12 V | Direct: 12 V key-switched circuit | RV360-EXT, RV360-512, RV360-MAG | The most common contractor and rental size. |
| Large Frame | Over about 2,500 lb | 12 V | Direct: 12 V key-switched circuit | RV360-EXT, RV360-512 | Heavy attachment work. Mount cameras high, away from mulcher and planer debris. |
| Battery-Electric | Varies by model | High-voltage battery | Key-switched 12 V accessory circuit, or RV360-DCC | RV360-EXT, RV360-512, RV360-DCC if needed | Never connect RioV360 to the traction battery. |
Skid Steer and Track Loader Models by Brand and Frame Size
| Brand | Ultra-Compact | Small Frame | Medium Frame | Large Frame |
|---|---|---|---|---|
| Bobcat | S70 | S450, T450 | S590, S64-2, S66-2, T595, T64-2, T66-2 | S650, S76-2, S770, S86-2, T650, T76-2, T770, T86-2 |
| Cat | Not listed | 226D3, 239D3 | 232D3, 236D3, 242D3, 246D3, 249D3, 255, 259D3 | 250, 260, 262D3, 270, 270 XE, 272D3, 265, 275, 285, 289D3, 299D3 |
| John Deere | Not listed | 316, 317, 318 | 320, 324, 325 | 330, 334, 331, 333, 335 |
| Case | Not listed | SR160B, SR175B, SV185B | SR210B, SR240B, TR270B | SR270B, SV280B, SV340B, TR310B, TR340B, TV370B, TV450B, TV620B |
| Kubota | Not listed | SVL50x | SSV65, SVL65-2, SVL75-3 | SSV75, SVL97-3, SVL110-3 |
| Takeuchi | Not listed | Not listed | TL6R, TL8R2 | TL10V2, TL11R3, TL12R2, TL12V2 |
| JCB | Not listed | Not listed | 215, 215T, 2TS-7T Teleskid | 270, 270T, 300, 300T, 3TS-8W, 3TS-8T Teleskid, 400T |
| New Holland | Not listed | L316 | L318, L320, L321 | L328, L334, C327, C332, C334, C337, C345, C362 |
| Gehl | R105 | R135, R165 | R190, R220, RT175, RT210 | R260, V270, V330, V335, V360, RT250, VT320, VT335 |
| ASV | RT-25, RT-40 | RT-50 | RT-65, VT-75 | VT-80, VT-100, RT-135 |
Older Skid Steers and Track Loaders
| Brand | Older series | How to match |
|---|---|---|
| Bobcat | K-Series, M-Series and R-Series | S185 fits Medium Frame; S250, S300 and T300 fit Large Frame |
| Cat | B, C and D series | 246C and 262C fit like the 246D3 and 262D3 |
| John Deere | 300 Series, D and G series | 320G and 332G fit like the 320 and 330 |
| Case | 400 Series and Alpha Series | SR250, SV300 and TR320 fit Large Frame |
| New Holland | 200 Series | L230 and C238 fit Large Frame |
| Gehl | E-Series and GEN:2 | Match by rated operating capacity |
Older machines fit by rated operating capacity. Find the capacity on the data plate or spec sheet and use the matching frame size. Not listed? Send the make and model and we will confirm the kit within one business day.
Frame sizes, capacities and model lists are approximate and vary by year and region. Skid steer capacity is rated at 50% of tipping load and track loader capacity at 35%. Brand and model names are trademarks of their owners. RioDatos is not affiliated with or endorsed by any manufacturer listed. Model names are used only to identify compatible machines.
Skid Steer Camera System Power: 12 V and Electric
- Diesel machines: 12 V system. Connect to a fused, key-switched 12 V circuit at the cab fuse panel and the constant 12 V line, as the user manual shows. No converter needed.
- Battery-electric loaders: never connect RioV360 to the traction battery. Tap the key-switched 12 V accessory circuit that runs the lights and display.
- No low-voltage circuit: add the RV360-DCC isolated DC-DC converter. Battery packs are isolated from the frame, so the converter must be isolated too.
RioV360 User Manual: installation, settings and troubleshooting. Download the RioV360 User Manual (PDF, v4.4).

Camera / Beacon Layout for Skid Steers and Track Loaders
- Rear: on the rear door or the ROPS crossbar above it, aimed down at the reverse path. The rear is the biggest blind zone on a skid steer.
- Sides: high on the rear cab corners, aimed along the tires or tracks and above the lift arm path.
- Front: on the front edge of the cab roof, looking over the attachment.
- Monitor: on a ROPS post with the RV360-EXT kit, clear of the door swing and the seat bar.
- Beacon: on the cab roof at the rear, where ground crews can see and hear it.
Front-entry doors: keep all cables and the monitor off the door. JCB side-entry machines: keep the door side clear and mount the monitor on the boom side. Route cables away from the lift arm pivots.
No tags for workers to wear: the AI cameras detect any person in the zone.
RioV360 Accessories in This Guide
- RV360-EXT: Monitor Extension and Mounting Kit: rail clamp, round base, cab-frame bracket or T-attachment.
- RV360-512: Upgraded Storage: 512GB card for about 60 hours of continuous video.
- RV360-MAG: Magnetic Camera Mounts: no-drill mounting on the steel cab, ideal for trial positions (US shipments).
- RV360-PWR: Bench Test AC Power Adapter: run the system from a wall outlet and learn it on a table before install.
- RV360-DCC: Isolated DC-DC Converter: for battery-electric loaders with no low-voltage circuit. Priced on quote.
PILOT Unit Program
Prove It on Your Skid Steer Before You Commit
Put RioV360 on your highest-risk skid steer or track loader and let your operators, supervisors and EHS team see it work in your own operation. No long trial agreements and no software to set up. Install it, run it, and decide. See the skid steer pilot program.
- Pick the machineChoose the skid steer with the most foot traffic or the worst rear blind spot.
- OrderSend the make, model and serial number. Pay by credit card.
- Ships fastIn-stock units ship from Arizona in 2 business days.
- InstallMost teams finish in under 2 hours with the user manual.
- Roll outUse the same kit and layout across the rest of the fleet.
Included with the PILOT unit: 4 AI cameras, 7 inch monitor, 120 dB voice beacon, 256GB card, wiring harness, mounting hardware, user manual and 18-month warranty. Phone, email or Teams support for your installer.
Recommended PILOT Unit Accessories
Upgraded Storage
512GB high endurance card for about 60 hours of continuous video.
Monitor Extension and Mounting Kit
Rail clamp, round base, cab-frame bracket or T-attachment.
Magnetic Camera Mounting Kit
No-drill camera mounts to trial positions on the steel cab.
Bench Test AC Power Adapter
Run the system from a wall outlet and learn it on a table before install.
Frequently Asked Questions
Does RioV360 fit Bobcat skid steers?
Yes. From the S70 to the S86 and the T450 to the T86, Bobcat loaders run 12 V, which RioV360 uses directly. Find the model in the brand table for the frame size and accessories.
Does RioV360 fit compact track loaders?
Yes. Track loaders share the cab and frame of the matching skid steer, so they use the same kit and camera layout.
Where does the monitor go on a front-entry skid steer?
On a ROPS post with the RV360-EXT kit, clear of the door swing and the seat bar, so it never blocks getting in or out.
Will the lift arms block the cameras?
Mount the side and front cameras high on the cab, above the lift arm path. Then the arms do not sweep across the lenses on radial or vertical lift machines.
Do workers need to wear tags?
No. RioV360 uses AI cameras to detect any person in the zone, with nothing to wear or charge.
More on skid steers: skid steer pedestrian detection and the skid steer safety camera system.
Request a Skid Steer Camera System Quote
Send your skid steer and track loader makes, models and quantities. Within one business day, we will email pricing, the recommended kit and accessories.
Prefer to talk? Call John directly at +1 (520) 501-0602 or email info@riodatos.com.
