Quote
Overhead view of a plant floor with forklift lanes and walkways marked

Forklift Speed Monitoring With CCTV AI

See where speeding actually happens, by zone, shift and machine.

inviol tracks forklift and vehicle speed on your existing cameras against limits you set for each area, and logs every breach with video.

Overhead camera view of a forklift near a marked exclusion zone at a dock

Speeding Is the Risk Everyone Knows and Nobody Measures

A forklift moving too fast through a blind corner or intersection is one of those risks everyone knows about but nobody sees consistently. Supervisors catch it occasionally. Telematics shows top speed but not where it happened or who was nearby.

Forklift speed monitoring with CCTV AI gives you data on where and when speeding actually happens, not just where you think it happens.

How Forklift Speed Monitoring Works

  • Set the limit: choose a speed threshold for each zone and machine type.
  • Watch every camera: inviol tracks forklift and vehicle speed across the zones your cameras cover.
  • Flag the event: when a threshold is exceeded, the event is logged with a short clip, a risk rating and context.
  • See the pattern: reports show which zones, shifts and times produce the most speeding.
  • Connects to your cameras: inviol connects to existing CCTV through standard RTSP feeds and works with the vast majority of camera and recorder (NVR/DVR) setups.
  • Runs on site: a small inviol hardware unit sits next to your recorder and analyzes footage in real time. Only event details and short clips leave the site, so 99% of your data stays on site.
  • Logs the event: each event is saved with a 20 to 30 second video clip, a risk rating and context about what happened.
  • Nothing on the trucks: no new cameras, no sensors on forklifts and no new cabling.

What to Do With Speed Data

  • Coach the operator: show the clip, not a number on a report.
  • Fix the layout: a straight run into a blind crossing invites speed. Add a stop line, a mirror or a barrier.
  • Tune your limiters: if you use on-forklift speed limiters, put the lower limits where the data says they are needed.
  • Check the fix worked: keep watching the same zone and see whether speeding events drop.
"80% reduction of risk that involves vehicles & plant machinery on site."

Tracey Crookston, Branch Manager, New Lynn PlaceMakers, as quoted by inviol

Frequently Asked Questions

How does CCTV measure forklift speed?

inviol's computer vision AI tracks vehicles through camera views and compares their speed against the limit you set for that zone. When a vehicle exceeds the threshold, it logs an event with a short clip.

Can we set different limits by area?

Yes. Speed limits can be set per machine and per location, so a dock, a main aisle and a pedestrian crossing can each have their own threshold.

Is this the same as a speed limiter?

No. A speed limiter caps the truck. CCTV speed monitoring shows where and when speeding happens across the site, which helps you coach, redesign routes and confirm a limiter is set where it matters.

Do we need sensors on the forklifts?

No. inviol uses your existing CCTV cameras, so nothing is installed on the trucks.

inviol Customer Results

Proven on Real Sites

What inviol customers measured after turning their existing CCTV into a safety system.

67%

average risk reduction per site

Americold

40%

fewer real incidents over three years

Woolworths

50.4%

fewer high-risk interactions across pilot sites

Bapcor

60%

risk reduction in two months

The Warehouse Group

Results published by inviol from its customer case studies.

Request an inviol Demo

See inviol running on footage like yours. Tell us a little about your site and we will reply within one business day with demo times.

No new cameras, no sensors on your forklifts and no long contract to start.

Request an inviol Demo

Just your name and email. We will set up a short demo on footage like yours, and you get our CCTV AI Safety Readiness Checklist right away.

No phone number needed. No sales calls unless you ask.