Quote
Forklift and wheel loader moving cement blocks in a busy yard

Komatsu Forklift Camera and Pedestrian Detection Fitment Guide

Find your Komatsu series, match the power, and order the right RioV360 kit.

This guide lists Komatsu forklifts by truck type and series with the RioV360 kit, power connection, accessories and camera layout for each. Gas, LP and diesel trucks connect directly. Electric trucks use their low-voltage accessory circuit.

How to Use This Komatsu Forklift Fitment Guide

  1. Find your Komatsu series in the tables below.
  2. Match the power column to your truck. RioV360 runs on 8 to 32 V DC, so IC trucks connect directly to the switched ignition circuit.
  3. Confirm the model and voltage on the truck data plate. Model ranges change by year and region.
  4. Check attachments. Side shifters, clamps and long forks can change where cameras need to go.
  5. Order the complete kit, plus any accessories listed for your truck type.

Take it to the shop floor. The printable fitment guide has the truck type and series tables, power connections, camera and beacon layout, accessories and PILOT unit details in a PDF.

Komatsu Forklift Pedestrian Detection by Truck Type

Truck typeCapacityPowerRioV360 power connectionRioV360 AccessoriesNotes
IC Pneumatic3,000 to 17,500 lb12 VDirect: 12 V key-switched circuitRV360-EXT, RV360-512Outdoor yards and docks. Rear camera on the counterweight or overhead guard.
IC Cushion4,000 to 6,500 lb12 VDirect: 12 V key-switched circuitRV360-EXT, RV360-512, RV360-MAGIndoor and dock work. RV360-MAG speeds installs on steel guards.
Electric Counterbalance3,000 to 7,000 lb48 or 80 V batteryTruck accessory circuit (12/24 V, key-switched). Fallback: RV360-DCCRV360-EXT, RV360-512, RV360-DCC if neededNever connect RioV360 to the traction battery.

Komatsu Forklift Models by Truck Type

Truck typeSeries and modelsCapacity
IC PneumaticAX50 series, BX50 FG20T-16 to FG32HT-16, CX50 series, FH hydrostatic (FH50-1, FH70-2, FH80-2)3,000 to 17,500 lb
IC CushionBX50 FG20ST-16 to FG32SHT-164,000 to 6,500 lb
Electric CounterbalanceAE50 and AM50 series3,000 to 7,000 lb

Older Komatsu Forklifts

Truck typeOlder seriesHow to match
ICDash 11, 12 and 14 (FG25T-12, FG25ST-14)An FG25T-12 fits like the FG25T-16
ElectricEarlier FB series (FB15-12, FB25SH)Use the accessory circuit, or the RV360-DCC

Older trucks fit by truck type and power. IC trucks connect directly to 12 V. Electric trucks use the key-switched accessory circuit or the RV360-DCC. Not listed? Send the data plate photo and we will confirm the kit within one business day.

Series, capacities and model lists are approximate and vary by year and region. Komatsu is a trademark of its owner. RioDatos is not affiliated with or endorsed by Komatsu. Model names are used only to identify compatible machines.

Komatsu Forklift Pedestrian Detection Power: IC and Electric

  • Gas, LP and diesel: 12 V system. Connect to a fused, key-switched 12 V circuit and the constant 12 V line, as the user manual shows.
  • Electric: 24, 36, 48 or 80 V traction battery. Never connect RioV360 to the traction battery.
  • Accessory circuit: electric trucks run lights, horn and dash on a key-switched 12 or 24 V circuit. A qualified installer can tap it, with no converter needed.
  • No low-voltage circuit: add the RV360-DCC isolated DC-DC converter. Electric forklift batteries are isolated from the frame, so the converter must be isolated too.

RioV360 User Manual: installation, settings and troubleshooting. Download the RioV360 User Manual (PDF, v4.4).

RioV360 AI pedestrian detection system on a warehouse forklift

Camera / Beacon Layout for Komatsu Forklifts

  • Rear: on the counterweight or the rear overhead guard crossbar, aimed at the reverse path.
  • Sides: on the overhead guard posts, aimed along the turning arc.
  • Front: on the front overhead guard crossbar, looking past the load and mast.
  • Monitor: on the overhead guard post or dash with the RV360-EXT kit.
  • Beacon: high on the rear guard, where people on foot can see and hear it.

A common alternative layout is two cameras forward, one rear and a side curtain zone on the passenger side.

No tags for workers to wear: the AI cameras detect any person in the zone.

RioV360 Accessories in This Guide

  • RV360-EXT: Monitor Extension and Mounting Kit: rail clamp, round base, cab-frame bracket or T-attachment.
  • RV360-512: Upgraded Storage: 512GB card for about 60 hours of continuous video.
  • RV360-MAG: Magnetic Camera Mounts: no-drill mounting on steel guards and counterweights (US shipments).
  • RV360-CBX: Extension Cables: two 3 m and two 5 m camera cables plus a 5 m monitor cable for long trucks.
  • RV360-DCC: Isolated DC-DC Converter: for electric trucks with no low-voltage circuit. Priced on quote.

PILOT Unit Program

Prove It on Your Komatsu Before You Commit

Put RioV360 on your highest-risk Komatsu forklift and let your operators, supervisors and EHS team see it work in your own operation. No long trial agreements and no software to set up. Install it, run it, and decide.

$500 offPILOT discount applies to all RioV360 units through December 31, 2026
  1. Pick the truckChoose the forklift with the most foot traffic or the worst blind spots.
  2. OrderSend the model and serial number. Pay by credit card.
  3. Ships fastIn-stock units ship from Arizona in 2 business days.
  4. InstallFollow the user manual and the layout in this guide.
  5. Roll outUse the same kit and layout across the rest of the fleet.

Included with the PILOT unit: 4 AI cameras, 7 inch monitor, 120 dB voice beacon, 256GB card, wiring harness, mounting hardware, user manual and 18-month warranty. Phone, email or Teams support for your installer.

Recommended PILOT Unit Accessories

RV360-512

Upgraded Storage

512GB high endurance card for about 60 hours of continuous video.

RV360-EXT

Monitor Extension and Mounting Kit

Rail clamp, round base, cab-frame bracket or T-attachment.

RV360-MAG

Magnetic Camera Mounting Kit

No-drill camera mounts to trial positions on steel guards.

RV360-PWR

Bench Test AC Power Adapter

Run the system from a wall outlet and learn it on a table before install.

Frequently Asked Questions

Does RioV360 fit Komatsu forklifts?

Yes. Komatsu IC trucks run 12 V and RioV360 runs on 8 to 32 V, so they connect directly. Electric Komatsu trucks use the key-switched accessory circuit.

Which Komatsu forklift models does RioV360 fit?

All current Komatsu IC and electric counterbalance series. IC pneumatic: AX50 series, BX50 FG20T-16 to FG32HT-16, CX50 series. IC cushion: BX50 FG20ST-16 to FG32SHT-16. Electric counterbalance: AE50 and AM50 series. Older trucks fit by truck type and power.

Does RioV360 work on electric Komatsu forklifts?

Yes. Connect to the key-switched 12 or 24 V accessory circuit. If the truck has none, add the RV360-DCC isolated converter. Never connect to the traction battery.

Where do the cameras go on a forklift?

On the overhead guard and counterweight: rear, both sides and front, looking past the load and mast. The monitor goes on the guard post or dash.

Do workers need to wear tags?

No. RioV360 uses AI cameras to detect any person in the zone, with nothing to wear or charge.

More for forklift fleets: forklift blind spot detection, heavy-duty forklifts and all forklift brand guides.

Request a Komatsu Forklift Camera System Quote

Send your Komatsu models and quantities. Within one business day, we will email pricing, the recommended kit and accessories.

Prefer to talk? Call John directly at +1 (520) 501-0602 or email info@riodatos.com.

Get RioV360 Pricing by Email

Just your name and email. Pricing, the recommended kit and specs arrive within one business day.

No phone number needed. No sales calls unless you ask.