
Wheel Loader Pilot Program
One loader. Your yard. $500 off the first RioV360.
Put one RioV360 on the loader that worries you most, run it through real shifts, and decide on the fleet with your own video and operator feedback.

Wheel Loader Pilot Program
How the Wheel Loader Pilot Program Works
Wheel loaders spend much of the shift reversing out of a pile, often with people on foot behind the counterweight. The wheel loader pilot program lets you test AI pedestrian detection on that exact problem before you commit a budget.
- Pick the loader. Choose the machine with the most reversing near people: the stockpile loader, the truck-loading loader or the tip floor loader.
- We ship in 2 business days. In-stock kits leave Arizona with cameras, monitor, beacon, harness and mounting hardware.
- Install in under 2 hours. RioV360 runs on 8 to 32 V DC, so 12 V and 24 V loaders connect directly.
- Run it for 30 days. Operators work normally. The system alerts in the cab and outside, and records every camera.
Get Your Wheel Loader Pilot Quote
Tell us the loader model and where it works. We email pricing, the recommended kit for its size class and the pilot details within one business day.
Prefer to talk? Call John directly at (520) 501-0602 or email info@riodatos.com.

What to Measure During a Wheel Loader Pilot
Set the bar before the kit goes on, so the results answer the questions your safety committee and finance team will ask.
- How often people on foot enter the rear and side zones while the loader reverses
- Alert frequency and false alarms from dust, shadows and material
- Operator feedback after the first week and after the first month
- Recorded clips of near misses you can use for toolbox talks and training
Detection zones are adjustable from 0 to 5 meters on each camera, so you can tune them to the loader and the site.

The Wheel Loader Pilot Kit
The pilot unit is the full production RioV360 system, not a demo.
- 4 AI cameras, 1080p, 130° view, infrared night vision, IP69K
- 7 inch in-cab monitor with red, yellow and green zones
- 120 dB external beacon with voice alert for people on foot
- Continuous onboard recording, 256GB card included
- Complete installation kit, no software and no subscription
Recommended accessories: the RV360-EXT monitor mount extension for every loader, the RV360-CBX extension cable for medium and larger loaders with long rear camera runs, and the RV360-512 card for more recording time. See the wheel loader fitment guide for your size class.

Where a Wheel Loader Pilot Pays Off First
- Quarries and aggregate yards with loaders feeding trucks all day
- Waste transfer stations with spotters and drivers on the tip floor
- Road and site construction with ground crews around the loader
- Ports, bulk terminals and material yards with mixed traffic
- Snow removal and yard work at night and in low light
Read more on wheel loader pedestrian detection and wheel loaders at waste transfer stations.
Frequently Asked Questions
What is the wheel loader pilot program?
It is one complete RioV360 AI pedestrian detection system, $500 off, installed on one of your wheel loaders so your team can test detection, alerts and recorded video in real work before deciding on more machines.
Does RioV360 fit my wheel loader?
Yes, if it runs on 8 to 32 V DC. That covers 12 V and 24 V loaders of any brand, from compact yard loaders to production loaders. Battery-electric loaders use their key-switched accessory circuit or the RV360-DCC converter.
How long does installation take on a wheel loader?
Most teams finish in under two hours with the complete kit. On articulated loaders, mount cameras on the cab and rear frame so cables stay clear of the center hinge.
How long should the pilot run?
About 30 days. That is long enough to get past operator novelty and see several shifts of traffic, alerts and near misses on the recorded video.
What happens after the pilot?
You keep the system. It is a full production RioV360, not a demo unit. If the results hold up, order more kits for the rest of the fleet.
